How to mount both the feet and the rod for the grill grate or table on TRIPLE 90 at the same time?

To use TRIPLE with all accessories, follow these steps:

1. Remove the original outer screws (M8x12) from your TRIPLE.

2. Insert these screws into the lower hole of the TRIPLE. If any material remains on the right side, carefully clear it away with a screwdriver.

3. Next, mount the rod as described in the instructions.

4. Now, attach the foot using the supplied screws (M8x16) to the upper hole—the larger opening in the foot should fit smoothly over the lower screw head.

5. Secure all screws firmly—then your TRIPLE is ready for grilling adventures!